3Com Switch 4200G Family
27
Command Reference
packet-filter
Use the
packet-filter
command to apply ACL rules on the port to filter packets.
Ethernet Port view
parity
Use the
parity
command to set the check mode of the user interface.
User Interface view
passive
Use the
passive
command to set the data transmission mode to be passive mode.
FTP Client view
password
Use the
password
command to configure or change the system login password for a user.
Local User view
password
Use the
password
command to set a password for the local users.
Local User View
peer-public-key end
Use the
peer-public-key end
command to return to system view from public key view.
Public Key view
ping
Use the
ping
command to check the IP network connection and the reachability of the host.
Any view
port
Using the
port
command, you can add one port or one group of ports to a VLAN.
VLAN view
port access vlan
Use the
port access vlan
command to assign the access port to a specified VLAN.
Ethernet Port view
port hybrid protocol-vlan vlan
Use the
port hybrid protocol-vlan vlan
command to deliver specified protocol-based VLANs to a port.
Ethernet Port view
port hybrid pvid vlan
Use the
port hybrid pvid vlan
command to configure the default VLAN ID of the hybrid port.
Ethernet Port view
port hybrid vlan
Use the
port hybrid vlan
command to add the port to the specified VLAN(s). The port needs to have been
made a hybrid port before you can do this. See the related command below.
Ethernet Port view
port isolate
Use the
port isolate
command to add an Ethernet port to the isolation group.
Ethernet Port view
port link-aggregation group
Use the
port link-aggregation group
agg_id
command to add an Ethernet port to a manual or static
aggregation group.
Ethernet Port view
port link-type
Use the
port link-type
command to configure the link type of the Ethernet port.
Ethernet Port view
port-security enable
Use the
port-security enable
command to enable port security.
System view
port-security intrusion-mode
Use the
port-security intrusion-mode
command to set the action mode of the Intrusion Protection
feature.
Ethernet Port view
port-security max-mac-count
Use the
port-security max-mac-count
command to set the maximum number of MAC addresses allowed
to access the port.
Ethernet Port view
