background image

13

• In Italy the end-user must apply for a license from the national spectrum authority to operate this device 

outdoors. 

• To remain in conformance with European spectrum usage laws for Wireless LAN operation, the above 5 GHz 

channel limitations apply. The user should check the current channel of operation. If operation is occurring 
outside of the allowable frequencies as listed above, the user must cease operating the Access Point at that 
location and correct the configuration of the channels used before resuming operation.

• The 5 GHz Turbo mode feature is not allowed for operation in any European Community country.

• This device must be used with the radar detection feature required for European Community operation in the 

5 GHz bands. This device will avoid operating on a channel occupied by any radar system in the area. The 
presence of nearby radar operation may result in temporary interruption in communications of this device. 
The Access Point's radar detection feature will automatically restart operation on a channel free of radar. You 
may consult with the local technical support staff responsible for the wireless network to ensure the Access 
Point device(s) are properly configured for European Community operation.

B

RAZIL

 RF C

OMPLIANCE

Este produto está homologado pela ANATEL, de acordo com os procedimentos regulamentados pela  Resolução 
242/2000, e atende aos requisitos técnicos aplicados.

Opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de 
estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.

Para maiores informações, consulte o site da ANATEL - www.anatel.gov.br

K

OREA

 RF C

OMPLIANCE

This device may cause radio interference during its operation. Therefore service in relation to human life security 
is not available.

C

HINA

 R

O

HS 

Summary of Contents for 3CRWX5850GS - AirProtect Sentry 5850 Wireless Intrusion Prevention Sys















Reviews: