8
5
Connecting Cables
1
Attach the Ethernet cable to the Ethernet port on the wireless bridge.
2
For extra protection against rain or moisture, apply weatherproofing tape (not included)
around the Ethernet connector.
3
Be sure to ground the unit with an appropriate grounding wire (not included) by attaching it
to the grounding screw on the unit.
NOTE:
When you have connected external antennas, be sure to use the management
interface to configure the bridge for correct antenna operation.
CAUTION:
Be sure that grounding is available and that it meets local and national
electrical codes. For additional lightning protection, use lightning rods, lightning arrestors,
or surge suppressors.
RF Coaxial Cable
2.4 GHz External
Omnidirectional
Antenna
2.4 GHz
N-type Connector
5 GHz
N-type Connector
5 GHz External
High-gain Panel
Antenna
2.4 GHz
N-type Connector
