COS Security Services Switch Release Notes
3
Product Release Notes
NOTE: Once this action completes successfully, your COS system
software is upgraded.
You may notice an
"Exec'ed Program Error"
being displayed
during the upgrade process if you are upgrading from a release prior to
2.1.3. These error messages can be ignored and your system will still be
upgraded properly.
9.
Reboot your COS system.
4.0 User Documentation Errata :
The COS Users Guide for 2.3.0 lists the menu incorrectly for Configuring Tap
Interfaces. The correct options are below.
Pre-2.3.0
Tap Interfaces
=============
Name Enabled Physical Interfaces
port1 enabled fastethernet 1
port5 enabled fastethernet 5
Modify the Tap Interfaces <Add, Delete, Modify, eXit>[eXit]:
New 2.3.0 Tap menu should read as follows:
Network Tap Configuration
=========================
1) Tap Mode
2) Tap Interfaces
X) Exit
Enter choice <1 - 2, X>[X]: 1
Set TAP mode <normal, raw, VLAN, Port-VLAN>[normal]:
Network Tap Configuration
=========================
1) Tap Mode
2) Tap Interfaces
X) Exit
Enter choice <1 - 2, X>[X]: 2
Tap Interfaces
=============
Modify the Tap Interfaces <Add, Delete, Modify, eXit>[eXit]:
Name
Enabled
Promisc
VLAN
VLAN
Physical Interfaces
in out
