20
C
HAPTER
4: I
NSTALLATION
FOR
W
INDOWS
NT 4.0
Follow the instructions as they appear on the screen. Setup
prompts for a directory for installing the LAN+Modem card
software. The default directory is C:\MHZ. If you specify a
different directory, note the new name. You will need to
supply it later during the Setup process.
If you have questions about what appears on the screen,
click
Help
for an explanation.
5 When Setup completes copying files to your hard
disk, it displays a message about manual card setup.
6 Click OK to display a detailed Help Screen that will
guide you through card setup.
7 Select My Computer/Control Panel/Devices and scroll
down to the PCMCIA entry. Make sure its Status is
Started and Startup is set for Boot.
Complete steps 8 through 13 of the following procedure to
install the network function of the LAN+Modem card.
(These steps assume that the network is running.)
Complete steps 14 through 24 to install the modem
function.
8 Open the Control Panel and double-click Network.
9 Open the Adapters tab and click Add.
Alternatively, if NT Networking is not installed, Windows
NT prompts whether to install NT Networking.
If this is a first-time network installation, refer to
information for first-time users on the Setup help screen.
10 Select Have Disk. Specify C:\MHZ or another path as
chosen in Step 4.
11 Select 3Com Megahertz 10-100 + 56K PC Card and
click OK.
Wait while the files are copied . At the Network Settings
prompt, set the following options:
■
I/O Port Address (default is 300)
■
Interrupt (default is 10)
■
The modem and LAN functions of the card use the
same interrupt. The )
