13
Figure 2-1
Fitting a front bracket for rack-mounting
You must use the screws supplied with the securing brackets.
Damage caused to the unit by using incorrect screws invalidates your
warranty.
4) Repeat steps 2 and 3 for the other side of the switch.
5) Insert the switch into the 19-inch rack and secure with suitable
screws. Ensure that ventilation holes are not obstructed.
6) Reconnect network cables.
Powering On
The following steps describe how to get the switch powered-on and
ready for operation.
1) Check the network connections and cables.
2) Connect the power supply cable to the appropriate power socket
located on the rear panel of the unit.
Summary of Contents for 3CBLUG24A
Page 15: ...8 Figure 1 5 Network Design...
Page 39: ...32 VCCI Statement CCC Statement 3Com Baseline Switch 2816 2824 GB9254 Class A YD T993 GB4943 A...
Page 41: ...34 Pb Hg Cd Cr VI PBB PBDE CF X X 1 X 2 X 3 X 1 X 2 X 3 X 4 X 1 X 2 X X...
Page 42: ...35 Pb Hg Cd Cr VI PBB PBDE X X X 1 X 2 X SJ T11363 2006 X SJ T11363 2006...
