Operational Information
7
Once you have reassigned an IP address for your RAS 1500, use the
default user name “
Admin
” and the default password “
Password
”
when you configure features through the Web Configurator. You are
prompted to enter this user name and password when you select the first
feature, from the menu of features, that you want to configure. Both the
default user name and password will be overwritten once you set your
own unique manager user name and password. The user name must be
between 1 and 32 alphanumeric, nonblank characters and is
case-sensitive. The password must be between 1 and 15 characters and is
not case-sensitive.
List Connections
Command in the CLI
Sometimes a
list connections
command from the CLI (Command Line
Interface) will scroll information. If this occurs, press <CTRL-C> to refresh
the screen.
Using Fractional PRI
If you are using fractional PRI, obtain from your telco, information on the
PRI line and the channels that are associated with that line. Configure a
specific modem group to include only those PRI members. Do not use
modem group all.
Creating A Network
Service
Creating a network service automatically creates a modem group with
the same name as the network service. This could cause a problem if a
modem group already exists with the same name. The modem group will
be overwritten with new information.
Refreshing Web
Configuration
Interface Data
In order to ensure data between device and web browser is synchronized,
refresh the data in your web browser by clicking the reload or refresh
button. Do not leave the browser open on the desktop. When
configuration is complete exit out of the browser session.
Configuring Users
To properly change a user’s configuration, follow these general steps:
1
From the Web Configuration Interface, telnet to the CLI in the Router
Unit.
2
Disable the user.
3
Make the changes to the user’s configuration.
4
Enable the user.
