11
Power Down Procedure
Before powering down the Internet Server you should
ensure that all users have disconnected from the Internet
Server.
There are two recommended ways you can power down the
Internet Server:
■
Using the On/Off Switch
— Press the on/off switch
and release it immediately. You will hear 2 short beeps to
indicate that graceful shutdown has started. After a short
while the Internet Server powers off.
■
Through the Web interface
— See the User Guide for
instructions on shutting down the Internet Server using
the web interface.
CAUTION:
Never close down the Internet Server by
simply removing the power cable as you risk losing
data if you do this.
To prevent loss of data in the event of mains power
loss, 3Com recommends that where possible that the
Internet Server is connected to an uninterruptable
power supply.
In the event of a major problem, you may be
instructed by your Technical Support Representative to
carry out an Ungraceful Shutdown. To do this, press
the on/off switch for 5 seconds and you will hear 2
short beeps to indicate that ungraceful shutdown has
started. The Internet Server powers off immediately.
Summary of Contents for 3C19504
Page 4: ...4 ...