3Com 3C16630A, User Manual

Page: 72 / 132

3 - 44 C
H A P T E R
3: U
S I N G T H E
VT100 M
A N A G E M E N T
I
N T E R F A C E
DUA1 663- 0BAA03
W hen you configure a resilient link pair, the management facility will
automatically enable Link Pulse generation (see “Port Setup” on
page 3-36 ) f or both ports. If you subsequently delete the resilient link
pair, Link Pulse generation remains enabled.
DELETE (Button) Move the cursor to this button and press [Return] to
delete the resilient link pair specified by the Main Unit ID, Main Port ID,
Standby Unit ID and Standby Port ID fields. You will be asked to press
[Return] again for confirmation.
CANCEL (Button) Move the cursor to this button and press [Return] to
go back to the previous screen (either the Repeater Management
screen or the Repeater Resilience screen).
Remote Poll
The Remote Poll screen allows you to see if a remote device is
responding, by sending a message forcing a response from the target
device. This will determine if there is a path or a congested path
between this device and other devices on the network. To display the
screen, actuate the REMOTE POLL button on the Main Menu screen
(only available to users with manager access level or higher.)
Figure 3-24 Remote Poll Screen
3Com SuperStack II Remote Poll
POLL CANCEL
IP address format
IPX address format d.d.d.d
AABBCCDD:AABBCCDDEEFF
This operation will poll the target device.
Target Address : [11223344:112233445566]
Round Trip Time : 30 (milli-seconds)
2 Router Hops