manualshive.com logo in svg

3Com 3644A, User Manual

Share
Download
3Com 3644A User Manual Download Page 7

3600 Series Programmable Power Supply

VERSION 2.0  2004.6

 3600 SERIES USER MANUAL

 

5

1.3 Features

1. LCD display with back light.

2. Number keypad and rotary knob.

3. Maximum output voltage limitation.

4. Maximum output power limitation.

5. 10 parameters storage.

6. Can be series / parallel connected to expand output voltage/ current.

7. Free power management software.

1.4 Dimensions and Structure

    1.4.1 Dimension

                                       Fig 1 Dimension of 3600 Series Programmable DC power supply

Current

                                10mA                             10mA                          10mA

Protection                                       Over voltage / Over current / Over power

AC Input

                                               110V//- 15%, 47 to 63 Hz

Operating environment                                          0 to 50  C, 80% RH *

Weight

                                                                   6.00kg

Dimensions                                               212.6mmW x 88.1mmH x 250mmD

Software

                   PowerMS Power Management System software, ActiveX and

                                                    DLL tools support VB, VC++, DELPHI, LABVIEW

Standard Accessories                 User’s manual, AC cable, handlebars, software CD

Optional Accessories           RS232 adaptor, RS485 adaptor, USB adaptor, Mounting rack

* 0 to 35  C for full rated output. At higher temperaturers, the output current is derated 3% per  C.

Summary of Contents for 3644A




























Reviews:

No comments

Brands by name

Popular brands

Load more brands