Stacking Units
27
Figure 8
A stack of two units
Stacking Up To Four
Units
You can stack up to four Switch units using a Switch 3300 MM and the
appropriate number of Matrix Cables.
You need only one SuperStack 3 Switch 3300 MM per stack.
To stack up to four Switch units:
1
Power-off all the units.
2
Arrange the units as required. They can be rack-mounted or
free-standing; if you choose to have them free-standing, remember to
position the rubber feet as detailed in
“Placing Units On Top of Each
Other”
on
page 25
. When positioning the units, note that Matrix Cables
are 1m (3.28ft) long.
3
Connect the Matrix Cables, as shown in
Figure 9
:
a
Connect a Matrix Cable to the port marked Unit 2 on the
Switch 3300 MM. Connect the other end of this cable to the Matrix
Port on the Switch placed immediately above the Switch 3300 MM.
b
Connect a second Matrix Cable to the port marked Unit 3 on the
Switch 3300 MM. Connect the other end of this cable to the Matrix
Port on the next Switch up.
c
Connect a third Matrix Cable to the port marked Unit 4 on the
Switch 3300 MM. Connect the other end of this cable to the Matrix
Port on the Switch at the top of the stack.
