manualshive.com logo in svg

3Com 2924-PWR, User Manual

Share
Download
3Com 2924-PWR User Manual Download Page 85

Defining Access Control Lists

85

Removing ACL 

Binding

The 

ACL Binding Remove Page 

allows the network administrator to 

remove user-defined ACLs from a selected interface.

Monitor users have no access to this page

.

To remove ACL Binding:

1

Click 

Device > ACL > ACL Binding > Remove

. The 

ACL Binding Remove 

Page 

opens: 

Figure 37   

ACL Binding Remove Page

The 

ACL Binding Remove Page 

contains the following fields: 

■

Checkbox (unnamed)

 

— Marks the ACL for removal.

■

Interface

 — Displays the port interface to which the ACL is bound.

■

ACL Name

 — Displays the name of ACL to be removed from the 

selected port.

2

For each ACL to be removed, check the box to the left of the row in the 
table. To remove all ACLs, the topmost box may be checked.

3

Click 

. The selected ACLs are removed, and the device is 

updated.

Summary of Contents for 2924-PWR

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands