12
Disconnect all cables from the switch before continuing. Remove
all self adhesive pads from the underside of the switch if they
have been fitted.
If you use a shelf or support ensure that it will not obstruct the air
flow through the side panels of the switch.
To rack-mount the switch:
1) Place the switch the right way up on a hard flat surface, with the
front facing towards you.
2) Locate a securing bracket over the mounting holes on one side of
the front of the switch, as shown in Figure 2-1.
3) Insert the two screws and tighten with a suitable screwdriver.
Figure 2-1
Fitting a front bracket for rack-mounting
