3-2
C
H
A
P
T
E
R
3:
C
O
N
F
I
G
U
R
I
N
G
T
H
E
E
D
G
E
R
O
U
T
E
R
M
O
D
U
L
E
Managed
Configuration
Overview
You can manage an ONline or ONcore carrier using a network management
module installed in the same hub.
This section provides a brief overview of the following topics:
■
3Com Management Modules
■
Using Management Commands
■
Using ONdemand NCS
■
Carrier Configuration Tasks
3Com Management
Modules
You can manage the ONline or ONcore carrier through SNMP or
management commands if a management module is installed.
Management modules for ONline and ONcore hub types include:
■
ONline
– An ONline Ethernet Management Module (EMM) running software
Version v4.10 or later installed in the same hub as the Edge Router module
or a Token Ring Management Module (TRMM) running software
Version v3.30 or later installed in the same hub as the Edge Router module.
■
ONcore
– A Distributed Management Module (DMM) running software
Version v2.30 or later installed in the same hub as the Edge Router module.
Using Management
Commands
You can use management commands to make basic changes to carrier
configuration settings. For complete instructions on using management
commands to manage the carrier, refer to the guide for the management
module for your platform.
ONline management documentation includes:
■
ONline Ethernet Management Module Installation and Operation
Guide
(Document Number 17-00087)
■
ONline Management Commands Guide
(Document Number 17-00403)
■
ONline Token Ring Management Module User’s Guide
(Document Number 17-00211)
For ONcore management, refer to the
ONcore Distributed Management
Module Commands Guide
(Document Number 17-00372)
