3Com 1000, User Manual

Page: 152 / 152

E
LECTRO
-M
AGNETIC
C
OMPATIBILITY
FCC S
TATEMENT
This equipment has been tested with a class A computing device and has been found to
comply with part 15 of FCC Rules. Operation in a residential area may cause
unacceptable interference to radio and TV receptions, requiring the operator to take
whatever steps are necessary to correct the interference.
CSA S
TATEMENT
This Class A digital apparatus meets all requirements of the Canadian
interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
VCCI S
TATEMENT
I
NFORMATION
T
O
T
HE
U
SER
If this equipment does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
■ Reorient the receiving antenna.
■ Relocate the equipment with respect to the receiver.
■ Move the equipment away from the receiver.
■ Plug the equipment into a different outlet so that equipment and receiver are
on different branch circuits.
If necessary, the user should consult the dealer or an experienced radio/television
technician for additional suggestions. The user may find the following booklet prepared
by the Federal Communications Commission helpful:
How to Identify and Resolve Radio-TV Interference Problems
This booklet is available from the U.S. Government Printing Office, Washington, DC
20402, Stock No. 004-000-00345-4.
In order to meet FCC emissions limits, this equipment must be used only with cables
which comply with IEEE 802.3.