3Com 1000, User Manual

Page: 112 / 152

6-8 C
HAPTER
6: S
TATUS
M
ONITORING AND
S
TATISTICS
Status Monitoring
The status screen provides read-only information
about the Switch 1000. This information may be
useful for your Technical Support representative if
you have a problem.
To access the screen, from the Main Menu, select
the STATUS option. The Status screen is displayed,
as shown in
Figure 6-5 .
The Status screen shows the following:
System Up Time The time the unit has been run-
ning since the last reset or power-off/on cycle.
Number Of Resets The total number of system
resets since the Switch was first installed or initial-
ized; either power on, manual reset or a watchdog
expiry.
Last Reset Type Other / Command / Watchdog /
Power-reset / System-error This field indicates the
cause of the last reset. It may be due to manage-
ment command, watchdog timeout expiry, power
interruption, a manual reset or a system error.
Hardware Version The hardware version number
of the Switch.
Upgradable Software Version The version
number of the agent software image stored in
Flash EPROM. This version number is automatically
updated when you download new software.
Figure 6-5 Status screen
Boot Software Version This is the version number
of the Boot software stored on the Switch 1000.
FAULT LOG Select this button to display the Switch
Fault Log, described the next section.