3branch.com
©
3branch All Rights Reserved.
877. 899.9902
discovery
TM
activity table system
assembly instructions
discovery
TM
hardware & tool items
n1 nut
b1 bolt
m4
allen key
drawer key
⅝
flat
wrench
check your packing list & unpack
1. Packing list is attached to outside of box
Ensure you have all Discovery
TM
components.
2. Move all packages to intended area for set-up.
3. Unpack Discovery
TM
components. Place the
table in desired location.
prepare components for assembly
1. For all tables and benches, unlock drawer using a
drawer key
supplied in hardware bag.
2. Slowly slide drawer open, ensuring the unit doesn’t tip.
3. Locate the holes on the sides of the unit.
insert n1 nut into tables & benches
1. Insert
n1 nut
in each open hole as shown in
image 3
.
Repeat this step as needed for all tables and benches.
2. Once all
n1 nuts
are inserted, you are ready to attach
additional components.
attach components with b1 bolts
1. With two people, hold components together so that
all holes align. While holding components in position,
insert
b1 bolt
and “start” each screw by hand.
2. Make sure all
b1 bolts
are snug before releasing
weight of attached component.
hand tighten bolts
1. Use the
m4 allen key
and turn clockwise to hand
tighten each bolt snug.
2. Repeat step 3 - 5 as needed to complete assembly
of all components. When complete, add table top
and cushions if applicable.
adjust table or bench levelers
1. Use
⅝
flat wrench
to adjust level of table or bench.
2. Insert wrench under table or bench at the feet.
3. Ensure wrench is seated properly. Turn clockwise to
lower foot; counter-clockwise to raise.
NOTICE:
For end panel and tower components,
n1 nuts
come embedded
from the factory. Use
b1 bolts
accordingly to attach these components.
1
2
3
4
5
6
SAFETY WARNING
Do not attempt to assemble the table system alone.
Use two people when moving and or attaching components.
Components are heavy. Personal injury or product damage
can occur if precautions are not taken! Be smart, be safe.
Assembly of this product comes down to simple nuts and bolts. The
following directions will get you started. Whether assembling a single
table or a large configuration, these basic steps will provide everything
you need to assemble your product.