3B SCIENTIFIC Hall Effect Basic Apparatus, Instruction Manual, Page: 1 / 6

3B SCIENTIFIC® PHYSICS
1
Hall Effect Basic Apparatus 1009934
Instruction manual
10/15 ALF
1 Decoupled measurement outputs (4-mm-safety
sockets)
2 Earth socket
3 Power supply input, 12 V AC/3A
4 4-mm plugs for insertion into supplied U-shaped
holder
5 Trimmer for sample current
6 Sample fixture
7 Measurement outputs, 4-mm safety sockets
8 Trimmer for Hall voltage compensation
9 Trimmer for temperature
10 Decoupled measurement outputs (8-pin mini-
DIN sockets)
11 Display
12 Fixture for magnetic field sensor
13 Buttons for changing display
1. Safety instructions
The equipment conforms to safety regulations for
electrical measuring instruments and control and
laboratory equipment as per DIN EN 61010, part 1
and is designed to conform to protection class 3. It
is intended for use in dry rooms which are suitable
for the use of electrical equipment.

If the equipment can no longer be operated
without hazards arising, it should immediate-
ly be withdrawn from use.

Do not expose the equipment to high humidity,
extreme temperatures or severe shocks.

Before using the equipment, read the in-
struction manual in order to avoid damage to
the equipment or injury to users.
The board with the sample can become very hot
when in operation (170°C) so that there is a risk of
burns.

Before removing the circuit board, allow it
sufficient time to cool.