Predator ULTRA Installation Manual V2.1.25.3
Page 59
© 360 Vision Technology Ltd.
11.2.7 Interfaces
Auxiliary Functions
Allows the camera to be configured to use ONVIF Auxiliary commands.
Features available are:-
•
Disable Forced Settings - Switch off forced settings, camera to use settings as per light level.
Force ONVIF Version Configuration
• Reported Version - Can be used to change the ONVIF version reported by the camera to the VMS,
options are:- Default - ONVIF 2.40, V2.02, V2.20 & V2.40. OK setting and then re-boot camera from
web page to apply.
• Preset Token Format - Default (Used on certain VMS servers. Uses mix of text and ‘P’ zero-pad
number as preset tokens). Number only (Used on certain VMS servers. Uses numbers as preset
tokens). ‘P’ zero-pad number (Used on certain VMS servers. Uses P001 to P360 as preset tokens).
• Authorisation Elevation - Used on Vicon VMS, allows the anonymous user to set as admin, viewer or
operator.
• Pan/Tilt position Range - Feature not available
• Advertise Multicast - Switch on to advertise the camera supports multicast via ONVIF.
• Auxiliary Functions - Used to set how the VMS will see the ONVIF Auxiliary Token.
Configurable - Aux 1 - 8, configurable via web page
Standard - Standard ONVIF
Additional - Additional control commands using the ONVIF Standard
•
Pre-defined Presets
Advertise All - Show all pre-defined presets, when the VMS requests the presets from the camera.
Advertise Re-definable - Show re-definable pre-defined presets only e.g. Home
Omit - Do not show the pre-defined presets, when the VMS requests the presets from the camera.
• Iris Scale - Feature not available
OK
to apply the new settings into the Thermal IP.
Cancel
to abandon the changes to the interface settings.
