Instant Replay 2 Owners Manual Page 21
Using the Playback Sample Rate Converter
There are three ways to set the sample rate of a Cut being played.
1.
At the same sample rate it was recorded
2.
At a specified sample rate ( 44.1K or 48K )
3.
At a rate determined by the AES/EBU or IEC958 II input clock
To play a cut at a user-specified sample rate.
Press
MENU->CONFIGURATION->PLAYBACK SAMPLE RATE
Then Press
ENTER
•
Select OUTPUT AT 48K to play the cut at 48Kb/S
•
Select OUTPUT AT 44.1K to play the cut at 44.1Kb/S
•
Select SYNC TO DIGITAL IN to play the cut at the rate of the AES/EBU or IEC958 II
input clock
•
Select AS RECORDED to play the cut at the rate it was recorded ( this is the default )
Press
ENTER
to complete the selection