360 Systems Image Server 2000 V-2000 Operation Manual Download Page 92

Page: 92 / 137

Hard Disk Management

Log-In to the RAID Utilities

Figure 30: Log-In to RAID Utilities

To log in to the RAID utilities, perform the following steps. The above window will appear.

•

Open the RAID utilities by selecting

START>SYSTEM>RAID STATUS

•

A Security Alert window will pop up and provide information about a security certificate.

Select

Yes

to proceed.

•

In the

Login

window, select ADMINISTRATOR from the drop down menu.

•

In the

Password

window, make no entry. (leave it blank)

•

Click the

Login Button

to enter the Login Utilities.

•

The Summary screen will be displayed. A message under the

Status

heading may appear.

This can be either a

WARNING

or an

ERROR

, depending upon the severity of the problem.

Summary of Contents for Image Server 2000 V-2000









































































































































Search results

Summary of Contents for Image Server 2000 V-2000

Reviews:

Related manuals for Image Server 2000 V-2000

Brands by name

Popular brands

360 Systems Image Server 2000 V-2000, Operation Manual

Search results

Summary of Contents for Image Server 2000 V-2000

Reviews:

Related manuals for Image Server 2000 V-2000

Brands by name

Popular brands