360 BANDIT HARVEST INTERNATIONAL Installation Instructions Download Page 4

Page: 4 / 4

PLUMBING RECOMMENDATIONS:

To prevent excess fertilizer from dribbling out of the hoses

when product application is shut off , install one push to

connect polypropylene (Inlet x Outlet) 3/8” O.D. check valve

(not included) in the plumbing to each row prior to the 360

BANDIT orifi ces. Check valve is available at Dultmeier Sales

(Item #BUCV1103-P38).
A 50 mesh strainer (not included) can be used in the

complete plumbing system between tanks and 360
BANDIT to help prevent debris from blocking orifi ces.

Install orifi ce plates

in the rubber grommets

Assemble pluming components in the arrangement shown
above

Attach the plumbing assembly to each of the hoses coming
from the house guides

NOTE: If hoses are not fully seated in the push to connect,

they will leak. Hoses seat 7/8” of an inch deep or until you

hear a snap.

The supplied push to connect adapter in the 360 BANDIT kit

connects to 3/8” push to connect compatible hose.
Secure hoses to row unit with provided zip ties.

Slide the closing system into place, ensuring the pin hole

lines up with the hole on the BANDIT unit.
Using the previously removed pin and hair clip

or the

provided pair of 1/2” bolts and nuts, secure the closing

system to the BANDIT unit.
Reinstall insecticide attachment, if present.

INSTALLATION INSTRUCTIONS

HARVEST INTERNATIONAL

STEP 6

REINSTALL CLOSING SYSTEM

STEP 7

ASSEMBLE PLUBING

INSTALLATION COMPLETE

PAGE 4

Summary of Contents for BANDIT HARVEST INTERNATIONAL

Page 1: ... AT I O N A L M O D E L S 5 26 20 V4 3 6 0 B A N D I T 3 6 0 B A N D I T All trademarks are the property of 360 Yield Center its affiliates and or its licensors 2019 360 Yield Center All rights reserved F O R Q U E S T I O N S P L E A S E C O N T A C T O U R P R O D U C T S U P P O R T T E A M A T 3 0 9 3 0 0 3 1 2 0 ...