background image

 
Known interference can be caused by Wi-fi enabled laptops and network hubs and some cell phones and 
PDAs. 
 
One solution may be to change to an alternate RF frequency using the VIDEO CHANNEL SELECTOR 
instructions. 
 
If the LCD display in the HMD has no picture but you still have audio, it normally is an indication that the 
batteries are low. 
 
 

Federal  Communications  Commission  (FCC)  Statement 

 
RADIO  FREQUENCY  INTERFERENCE  BTATEMENT 

This device complies with Part 15 of the FCC rules. Operation is subject to the following 
two conditions: 1) this device may not cause harmful interference, and 2) this device must 
accept any interference received, including interference that may cause undesired 
operation. 

 
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC rules.  These limits are designed to provide reasonable protection 
against harmful interference in a residential installation.  This equipment generates, uses and can 
radiate radio frequency energy and if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications.  However, there is no guarantee that 
interference will not occur in a particular installation.  If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment 
off and on, the user is encouraged to try correct the interference by one or more of the following 
measures: 
 

Reorient the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into and outlet on a circuit different from that to which the 

                receiver is connected. 
 

Consult the dealer or an experienced radio/TV technician for help. 

 
Any special accessories needed for compliance must be specified in the instruction manual. 
 
You are cautioned that changes or modifications not expressly approved by the party responsible 
for compliance could void your authority to operate the equipment.

 

 
 
 
 

 

This device must be operated to provide a separation distance of at least 20 cm from all 

persons and must not be co-located or operating in conjunction with any other antenna or 
transmitter.  

 

 

Summary of Contents for TRIMERSION










Reviews: