background image

5

|  Honeycomb Shades UltraLift Cordless™

Be aware that it is possible for children to strangle in window 

covering cords. To reduce the occurrence of accident, all cords 

must be kept out of the reach of children, including infants. Cord 

cleats are an effective way to implement this essential precaution. 

Mount the cord cleat at a safe height, taking 

into account furniture or other objects upon 

which a child may climb. Then after each use 

of the shade, simply wrap the excess cord 

around the cleat. It's fast, easy and safe.

To protect your children, we are pleased to 

provide cord cleats free of charge with every 

shade that we manufacture.

Young children can STRANGLE in cord and bead chain loops  

and in the loop(s) above the cord connector. They can also  

wrap cords around their necks and STRANGLE.

• Always keep cords and bead chains out of children’s reach.
•  Move cribs, playpens, and other furniture away from cords  

and bead chains. Children can climb furniture to get to cords.

ANSI/WMCA A100.1-2014 5.2.3

PROTECT YOUR CHILDREN

         WARNING

© 2017 3 Day Blinds LLC Part #PM-045 1/17

800-800-3329 | 3dayblinds.com

Summary of Contents for HONEYCOMB SHADES UltraLift Cordless






Reviews: