Overriding the System MAC Address
73
CHAPTER 7: Configuring the Broadband Connection
Overriding the System MAC Address
By default, the gateway uses its built-in hardware address for identification. You can override the
default MAC address If you are using devices that require a different MAC address.
1.
Open a Web browser and enter
http://home, http://gateway.2Wire.net, or
http://192.168.1.254
to access the gateway user interface.
2.
Click
on the
Home
page; the
Summary Status
page opens.
3.
Click
Link Configuration
; the
Link Configuration
page opens.
4.
Scroll down to the
Broadband IP Network
pane.
Summary of Contents for HomePortal 4011G
Page 1: ...Gateway Installation and User Guide 4011G Version 9 1 1 Rev 001 ...
Page 6: ...CHAPTER 1 Presenting the 4011G Gateway 2 This page is intentionally left blank ...
Page 70: ...CHAPTER 7 Configuring the Broadband Connection 66 Configuring PPP Authentication and Settings ...
Page 72: ...CHAPTER 7 Configuring the Broadband Connection 68 Modifying Broadband IP Addresses ...
