Gateway Installation and Support Guide
10
Appendix B: Indicator and Status Lights
The gateway has three indicator lights that can be used to diagnose installation and connection problems.
The following tables describe how to interpret the POWER, BROADBAND LINK, and LOCAL NETWORK lights.
Power light
Operating state
OFF
The gateway is not getting power.
Blinking green
The gateway is booting up.
Solid green
Power is on.
Solid red
System error. Contact Technical Support.
Broadband Link light
Operating state
OFF
No broadband signal is present. The gateway is not plugged into a
power outlet, or the gateway is not physically connected to your
broadband service.
Blinking orange
The gateway is attempting to establish a physical broadband
connection.
Solid red
The gateway has not detected a broadband signal.
Solid orange
The gateway has established a physical broadband connection but
was not able to successfully connect to your Internet Service
Provider, or has not yet been configured.
Blinking green
The gateway is attempting to establish a connection to your
broadband service(s).
Solid green
The gateway is fully connected to your broadband service(s).
Local Network light
Operating state
OFF
The gateway is not plugged into a power outlet, computer, or hub by
way of HomePNA
1
, USB
2
, Ethernet, or Wireless
3
.
1. The 2Wire 1070, 1070-B, and 1700HG gateways do not include HomePNA.
2. The 2Wire 1070-B gateway does not include USB.
3. The 2Wire 1070 and 1070-B gateways do not include wireless support.
ON
The gateway is connected to a computer or hub by way of
HomePNA
1
, USB
2
, Ethernet, or Wireless
3
.
