11
Appendix A: Wireless Adapter Configuration
Now that you have installed the drivers for your wireless adapter, you must configure it to work with
the 2Wire gateway. A wireless network requires a network name (SSID) and an encryption key to
operate.
Every 2Wire wireless gateway comes with a unique network name and encryption key printed on
the bottom of the unit
.
1. With the 2Wire Adapter Setup CD in your CD-
ROM drive, click
Run
from the Windows
Start
button
.
Enter D:\setup.exe in the
Open
field
enter and click
OK
.
If your CD-ROM drive is not located on D:,
substitute the appropriate letter (for example,
E:\setup.exe).
2. When the Driver and Utilities program page
displays, click the
Configure 2Wire Wireless
Adapter
button.
3. Enter the serial number and encryption key from your 2Wire wireless gateway, then click the
Begin Wireless Configuration
button to configure your adapter.
Book_802.11g USB Wireless Adapter.book Page 11 Wednesday, June 2, 2004 3:14 PM
