background image

20

21

2VV.

 Creating innovative solutions for you and your business since 1995.

MENU - USER LOCK

Limit level – see Ad1)

Enter PIN 0000~9999

(numeric values only)

Use this menu to set the limits to control the regulator with 

a multi-level panel

Options:

None

 – Limit inactive

On/Off

 – 

  

Only On/Off and access to the information menu are enabled in the main screen

On/Off, Temp, Flow

 – 

  

On/Off, the information menu, and temperature and air flow               

settings can be accessed without password.

Full

 – Only the information menu can be accessed without password

User mode

 – Special user mode, see image below

MENU - SUMMER HEATING

Use this menu to set heating limits in summer months

If the outside temperature sensor is not set, the “summer 

heating” mode will operate only according to the selected 

time and the temperature will not be taken into account

End of winter period 

(month number)

Start of winter 

period (month number)

Enable/disable

function

Temperature limit – the 

heating is disabled if the 

temperature on the “Outdoor” 

sensor is higher than the one 

set here

MENU - Night Reduction

This MENU allows for setting reduced temperatures during night  

hours with closed doors.

In this menu, the reduction of temperature may be set

 only by five degrees

 at the set time compared to the

set (required) temperature.

Setting reduced 

temperature range -1~-5°C

Setting start time

for reduced

 temperature

Setting time for ending

reduced temperature.

Activating function

MENU - DOOR CONTACT

Zapnutí/vypnutí

této funkce

Time interval

This MENU allows for setting the behaviour of the regula-

tor according to doors contact

Mode: 

Fixed

 - fixed setting

Selflearning 

- automation menu

Setting Fixed mode

Blower power with open doors

Required temperature with open 

doors

Overrun mode:

at a set time, or upon 

achieving a specific

temperature

7. CONTROL

Summary of Contents for IC3-C-AC5-04






























Reviews: