14
15
2VV.
Creating innovative solutions for you and your business since 1995.
ver.5 05-05-20
6. INSTALLATION
6.2-2 Protection
of the unit´s inlets and outlets
(not included)
If an inlet or outlet is not connected to the pipe,
a rain louvre must be used to prevent water and
solid particles from coming into contact with the
ventilator, heating elements, etc.
Accessories that must be ordered separately
6.3 CONNECTING MECHANICAL
ACCESSORIES
6.3-1 Air flap
These rectangular flaps are used to close the air
inlets connected to the ventilation unit.
Accessories that must be ordered separately
YOU WILL NEED
• 2 rectangular flaps (of corresponding dimen
-
sions)
• 2 actuators (with one or two wires, voltage
230 V)
• 8 M8 bolts and nuts
• 16 washers
• corresponding spanner
• flat tip screwdriver, Phillips screwdriver, sea
-
ling tape, and sealant