16
PP
2VV.
Creating innovative solutions for you and your business since 1995.
ver.1 20-08-21
Enabling BOOST mode activation from Standby state of the
unit. Activation can be achieved solely using an external
button. The unit is automatically engaged at the set time and
power after activating the button.
CAUTION: After this mode is over, the unit does not
switch back into Standby mode but will remain active.
The unit will work at the value set prior to its transition
into Standby mode.
1. Setting the time interval for which the mode will be
active after the BOOST contact is activated
2.
Setting the required airflow
Boost can be activated with the button connected to the
input y13/14, or with the Boost button (Fig. Boost) on main
screen
1. Setting the time interval after which the mode will be
active after PIR sensor activation (input at terminals
15/16). Range 1 - 60 minutes
2.
Setting the required flow range of 20% to 50%
The NIGHT VENTILATION and PERSONS PRESENT
modes cannot be used at the same time. ONLY one of these
modes may be selected in the HW SETTINGS menu.
08
08
Occupancy
Boost
14
15
1
2
1
2
