TECHNICAL SPECIFICATIONS
Print V1.0 Aug. 2K14
0230-00318
Model Name
System
Image Sensor
Scanning System
Maximum Image Resolution
Video Image Quality
Lens Type
S/N Ratio
Min. Illumination
PAL/NTSC
Progressive Scan
More than 50 dB (AGC OFF)
1280X960
As high as HD-SDI
AUTO, OFF, ON (LEVEL: 0~8)
OFF, AUTO (GRADATION: 0~2)
OFF, BLC, HSBLC (4 AREA)
ATW, AWC SET, INDOOR, OUTDOOR, AWB, MANUAL
Exposure Shutter Speed
D-WDR
Defog
Backlight
White Balance
AUTO, 1/25, 1/50, FLK, 1/200, 1/400, 1/1000, 1/2000, 1/5000, 1/10000,
1/50000, X2, X4, X6, X8, X10, X15, X20, X25, X30
Analog Output
1280H CVBS
COMET, AHD
Day&Night
DNR
2DNR
3DNR
AUTO, COLOR, B/W, EXT
OFF, LOW, MIDDLE, HIGH
OFF, LOW, MIDDLE, HIGH
RS485
D-EFFECT
Privacy Mask
Defect
SENS-UP
CAM ID
ID DISPLAY
BAUDRATE
0~255
OFF, ON
2400, 4800, 9600, 19200, 38400
FREEZE, MIRROR, NEG. IMAGE
OFF, ON (4 AREA SELECTABLE)
LIVE DPC, WHITE DPC, BLACK DPC
X2, X4, X6, X8, X10, X15, X20, X25, X30
Language
Operating Temperature
Power Supply
Power Consumption
Dimensions
Weight
ENGLISH, CHINESE, GERMANY, FRENCH, ITALIAN, SPANISH, POLISH,
RUSSIAN, PORTUGUESE, DUTCH, TURKISH
-10°C ~+50°C (14°F ~122°F)
DC12V±1V
1/3” SONY Exmor IMX238 CMOS Progressive Scan Sensor
IR LED
IR Range
69mA/DC12V (DAY); 250mA/DC12V (with IR LED ON)
up to [email protected]; 0Lux with IR on
30pcs
90 Feet
2CU-Z301-AHD
2.8~12mm Vari-focal (3 Mega) Lens
225.0mm (L) X 135.0mm (W) X 161.0mm (H)
Approx. 960g
→
INSTALLATION OF CAMERA
DIMENSIONS
Unit: mm
MOUNTING TEMPLATE STICKER
The mentioned technical drawing is for Reference only. Actual size of Mounting
Template Sticker is matched with Wall Mount Bracket.
The above mentioned technical drawings are for reference only.
All dimensions are in millimeters and approximate.
Installation Template
1.Stick Mounting Template Sticker supplied for drilling the mounting hole on the
mounting surface. The unit is intended to be mounted with four #10 screws through
the four outer holes at the base of dome camera.
2.Install the appropriate anchors or threaded fasteners.
Wall
Note:
Do not touch any component like the PCB and the lens, as this will damage the
camera.Switch on the power supply of 12 V DC after completing camera
connections. The power is supplied to the camera.
1
6
1
.0
225.0
1
3
5
.0
CAMERA CONNECTIONS
12 V DC Power Supply
Connect the 12 Volt DC power using DC Jack. Please make sure the polarity is correct.
Incorrect polarity may cause malfunction and/or damage to the camera.
Video Output Connection
Connect BNC connector with 75 Ohms coaxial cable at Video Out BNC socket.
Wiring Precautions:
Do not bend the coaxial cable into a curve whose radius is smaller than 10 times the
cable’s diameter.
Never staple the cable even if with circular staples. Otherwise impedance mismatching
will occur.d
Polarity Marking
(Center Positive)
