55
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Generate virtual ring tone
– enable/disable generation of the virtual ringing
tone to the VoIP interface.
Call length counting
– select whether the call should be counted in seconds or
minutes.
After call relax delay
– set the time between the end of the current call and
start of the next call via one and the same GSM/UMTS module. The
recommended value for heavy-traffic installations is 2 seconds!
Add random time
– use this auxiliary parameter to add random time in
seconds. Thus, the resultant time is the sum of the two above mentioned
parameters.
Network settings
BTS lock
– identify the BTS to which the GSM modules shall log in. Restart the
selected GSM modules to execute the changes.
Network operator code (MCC+MNC)
– set the local mobile network provider
code manually. If you do not enter a value, the provider will be selected
automatically.
Network register attempts
– set the count of network registration attempts if
the network rejects to register the +CREG:3 SIM responses.
Network register delay (0–3600)[s]
– set the registration delay, i.e. the
timeout within which the network may send another response after rejecting
+CREG:3.
Enable USIM and SIM Application Toolkit
– enable/disable the USIM and SIM
Application Toolkit services for the Telit HE/GE 910 modules.
Disconnect Call
Set the rules for automatic disconnection of outgoing calls to a wireless network.
SIM limit exceeded
– automatic call disconnection when the active SIM card
call limit is exceeded.
Time limit exceeded
– automatic call disconnection when the active SIM card
time of use is exhausted.
No ALERTING before CONNECT
– automatic call disconnection when the
gateway receives the call connect message without alerting.
Send CLIP from VoIP to GSM/UMTS
Transfer CLIP to GSM/UMTS
– enable/disable the function.
Separating char
– the CDN/CLIP separating character.
Modify (" removes one digit
) – you can change the CLIP. The "– character is
used for deleting one char from the left.
Caution
The BTS lock service work with specific GSM modules only (Q55, Q24,
GE910, HE910)!
If you set a wrong BTS lock, the selected GSM module(s) will not log in to
GSM.
Caution
The
service must be supported by the
Send CLIP from VoIP to GSM
GSM/UMTS provider. If not, the provider's network may reject the call!
