2N OfficeRoute User Manual Download Page 24

Page: 24 / 113

2N TELEKOMUNIKACE a.s., www.2n.cz

Figure 2.11:

Serial Console – Network Configuration

Address

– IP address of the gateway. If the dynamic address obtaining function

using the DHCP is enabled, the value cannot be changed manually.

Network mask –

Network mask. If the dynamic address obtaining function

using the DHCP is enabled, the value cannot be changed manually.

Gateway

– Default router IP address. It is used for routing the data traffic

beyond the network limits. If the dynamic address obtaining function using the
DHCP is enabled, the value cannot be changed manually.

DNS1 –

IP address of the first DNS.

DNS2

– IP address of the second DNS.

Host name

– Network name of the GSM gateway.

Domain

– Domain name.

Location

– Any text describing the gateway location. This value is published

through the SNMP (in special firmware versions).

Contact

– Text containing the gateway administration contact information. This

value is published through the SNMP (in special firmware versions).

DHCP

– Mark of the dynamic address assignment function. If selected, the

gateway gets its network settings from the DHCP server. If not, the values must
be entered manually.

Class

– The equipment class name that is sent in the network setting sending

request. This string can help the DHCP server distinguish different types of
equipment and assign configuration parameters to them accordingly.

PPPoE –

User name and password for PPPoE–based connection.

HW Addr –

Stable hardware address of equipment, i.e. the MAC address.

The

parameters at least must be set correctly for the

DHCP

Address/Network mask

gateway communication to be established within the TCP/IP network. The address of
one DNS at least should be set too.

Serial console configuration –

Set the terminal type and change the initial

serial link parameters – transmission rate, data and stop bits, parity and flow
control type.

Command line –

Set/change basic telephony settings – LCR, routes, SIP,

devices, calls, DISA.

States –

States of devices (signal strength, registration status, etc.) and calls.

Reboot

– This option restarts the device.

Settings

– DHCP and VRRP server settings.

Summary of Contents for OfficeRoute


















































































































Search results

Summary of Contents for OfficeRoute

Reviews:

Related manuals for OfficeRoute

Brands by name

Popular brands

2N OfficeRoute, User Manual

Search results

Summary of Contents for OfficeRoute

Reviews:

Related manuals for OfficeRoute

Brands by name

Popular brands