2N NetMic Complete Manual Download

Page: 70 / 114

2N TELEKOMUNIKACE a.s., www.2n.cz

2N® NetSpeaker Lite

Figure: 2N® NetSpeaker Lite Basic Unit, Part No. 914013E

Accessories:

12V DC/2A adapter, Part No. 914102x (E – Europe, GB – Great Britain, US –
USA)

Product Description

2N NetSpeaker Lite

is a LAN audio converter designed for public sound distribution

through the

System. It is connected to the

Syste

2N NetSpeaker

m via the local area network (LAN). It communicates with the

2N NetSpeaker

, receives the audio stream, decodes it and converts it into an analogue signal.

Server

can be controlled by two front panel buttons or an infrared

2N NetSpeaker Lite

remote controller.

is equipped with a digital input and output,

2N NetSpeaker Lite

which extend the converter options and may be helpful in special applications.

helps you extend the internal FLASH memory using microSD

NetSpeaker Lite

memory cards. Use the integrated Telnet server to make basic settings for connection
of

into the LAN (refer to the Basic Parameter Settings).

2N NetSpeaker Lite

Apply

the

2N® NetSpeaker

software for configuration and use of all functions (refer to the

2N® NetSpeaker Quick Start

and

for more

2N® NetSpeaker Administration manuals

details).

Summary of Contents for NetMic



















































































































Search results

Summary of Contents for NetMic

Reviews:

Related manuals for NetMic

Brands by name

Popular brands

2N NetMic, Complete Manual

Search results

Summary of Contents for NetMic

Reviews:

Related manuals for NetMic

Brands by name

Popular brands