2N NetMic Complete Manual Download | Manualshive

Page: 95 / 114

background image

95

2N TELEKOMUNIKACE a.s., www.2n.cz

1.
2.

3.

Power and Connection

The

can be connected to a standard local area network

2N

NetSpeaker Lite PCB

®

using a LAN interface via the RJ–45 connector on the backside. Always use CAT–5d or
higher class cables for reliability reasons. The LAN interface is equipped with the Auto
MDIX function for automatic detection of a straight or crossed cable.

The

can be fed using a 12V/2A DC (Part No. 914102E)

2N

NetSpeaker Lite PCB

®

power supply, or another power supply on condition that you keep the nominal values
included in the Electric Parameters subsection.

Connect the 12V DC power supply either to the back supply connector marked DC IN,
or terminals marked DC IN+ and DC IN–.

2N NetSpeaker Lite PCB Factory Reset

®

In some cases, it may be useful to reset the

factory

2N

NetSpeaker Lite PCB

®

values using the RESET button in the back. Do this, for example, if the

2N®

ceases to respond, which may be caused by incorrect LAN

NetSpeaker Lite PCB

settings, LAN configuration changes, forgotten password and so on.

Resetting Procedure:

Press the RESET button in the back.
Keep  the  RESET  button  pressed  until  the  front  green  LED  stops  shining  (for
approx. 10 s).
Release  the  button  as  soon  as  the  LED  starts  flashing  yellow  quickly.  It  means
that  the  configuration  in  the  internal  FLASH  memory  is  being  deleted.  This
operation takes about 50 s. Do not disconnect the device from the power supply
during this period.

Firmware Upgrade

The

firmware upgrade starts automatically whenever the

2N

NetSpeaker Lite

®

PCB

gets connected to the

. This

2N

NetSpeaker Lite

®

PCB

2N

NetSpeaker Server

®

guarantees that all connected devices have identical and latest firmware versions.
Refer to

for the latest firmware version.

Operating Terms and Transport

Operating temperature: 0° to 40° C (32° to 104° F)
Operating humidity: 10 to 85 % (not condensing)
Permitted temperature range for product transport: -25 to +60 ° C (-13° to 140°
F)

Warning:

If  you  use  an  adapter  other  than  the  recommended  one,  do  not  exceed  the
nominal  supply  voltage  value  of  12V.  Also  make  sure  that  the  supply  voltage
polarity  is  correct.  Exceeding  nominal  values  and/or  incorrect  connection  may
lead to irreversible damage of the equipment.

«
...
93
94
95
96
97
...
»

Summary of Contents for NetMic



















































































































Reviews:

No comments

Related manuals for NetMic

Brand: Harmar Mobility Pages: 53

Brand: Safety Clamps Pages: 16

SystemRoMedic EvaDrive450

Brand: Handicare Pages: 37

Brand: Thermo Scientific Pages: 68

Brand: Bear Pages: 21

Brand: WinSystems Pages: 30

TWN4 MultiTech 3 BLE

Brand: Elatec Pages: 13

Brand: GYS Pages: 52

Brand: Jacuzzi Pages: 28

Brand: WAGO Pages: 50

Brand: Keysight Pages: 46

Brand: ICP DAS USA Pages: 8

Brand: ActSafe Pages: 70

Brand: Raven Pages: 104

Brand: Arjohuntleigh Pages: 38

Brand: Allen-Bradley Pages: 24

Brand: IFM Pages: 16

SIRIUS 3RA2711-0DB00

Brand: Siemens Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands