Helios IP – Documentation
Page 15
Basic Function Tests
TCF000A Duplicated Addresses
The test verifies the presence of a switch with duplicate identifier.
Test Procedure
1.
Stop Helios PI using the Stop button.
2.
Create two switches in the device.
3.
Set identical Digital Output IDs for the two switches.
4.
Start the Helios IP driver using the Reinitialisation button.
Expected Results
1.
The two switches pass into the ConfigurationFailure status.
2.
The driver is not initialised and stops.
3.
The following record appears in the log:
At ‘DEVICE1’ and ‘DEVICE2’ nodes of ‘DRIVER’ a duplicate address ‘ADDRVALUE’ was
detected.
Where
DEVICE1 a DEVICE2 represent the names of the duplicate switches.
DRIVER represents the device name.
ADDRVALUE is the switch ID.
