2N Analog Vario, Installation Manual

Page: 23 / 77

Installation manual 2N® Analog Vario
23 / 77
15.
16.
17.
18.
19.
20.
•
•
•
Remove the inserts from the name plates.
Insert the printed foil labels.
Put the inserts back in the name plates.
Replace the name plates, clicking them into position. The name plates hold the matt foil
inserted underneath.
Check whether a silicone seal is inserted in the top groove of the plastic cover. A spare seal
package is included.
Close the metal cover and fix it with screws.
Outdoor Installation Rules
Always connect button backlighting – it is used for heating.
The joint between the roof module and the wall must be filled with a waterproof cement
to prevent water in-leak (see Figure 2.5).
Water must not leak in along or around the cables.
•
Warning
Make sure that all the holes are filled with a waterproof material – top, around the
cables and screws – and that a side sealing is ensured.
