2N 9160341, Installation Manual, Page: 99 / 107

2N Access Unit Installation Manual
99 / 107
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4. Technical Parameters
Audio
Speaker : 0.8 W / 8 Ω
Interface
Power supply : 12 V ±15 % / 1 A
PoE : PoE 802.3af (Class 0–12.95 W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45
Recommended cabling : Cat-5e or higher
Supported protocols : DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
Passive switch : make and break contact, up to 30 V / 1 A AC/DC
Active switch output : 8 to 12 V DC according to power supply (PoE: 10 V; adapter: source
voltage minus 2 V), up to 600 mA
Tamper switch is part of the 2N Access Unit
Inputs: passive / active mode (−30 V to +30 V DC)
OFF = open or U
in
> 1.5 V
ON = short-circuit or U
in
< 1.5 V
RFID card reader
Frequency: 13.56 MHz & 125 kHz
Supported 13.56 MHz cards (only card serial number is read):
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
FeliCa
ST SR(IX)
2N
®
Mobile Key
HID SE ((Seos, iClass SE, Mifare SE) valid for secured cards)
Supported 125 kHz cards: EM4100, EM4102
2N
®
IP Verso – Bluetooth module
Bluetooth 4.0 Compliant (Bluetooth Low Energy, BLE)
Security: asymmetric RSA-1024 and symmetric AES-128 encryption
RX sensitivity: up to −93 dBm
Range: adjustable (short ~ 0.5m, medium ~ 2m, long ~ up to 10m)
Power consumption: 20mA at 12V DC
Operational temperature range: −40°C ~ +60°C
Storage temperature range: −40°C ~ +70°C
Dimensions: 97 x 105 x 30mm
Compatible with 2N
®
IP Verso, 2N
®
LTE Verso and 2N Access Unit
Mobile app. support: Android 6.0 Marshmallow and higher, iOS 12.0 and higher
Mechanical properties