2N 1120102 User Manual Download

Page: 60 / 180

Setting Up a Network Conference

You can set up a network conference with multiple parties.

Procedure

Place a call to the first party.

Select

Conference

to place a new call.

Select

Invite

The active call is placed on hold.

Dial the second party

’

s number.

Repeat the above steps until you add all parties.

The conference is set up after the intended parties answer the call.

Note

: The Procedures for setting up a network conference call on specific servers may be different from the

introduction above. Contact your system administrator for more information.

Call Recording

You can record up to 12 hours in one file. By default, the recorded files are saved in the internal SD card.

But if there is a USB flash drive connected to the rear USB port of your phone, the recorded files will be saved

in the storage device according to the priority: USB flash drive > internal SD card.

Recording using a USB flash drive is not available by default. Contact your system administrator for enabling

this feature for you.

Topics

Recording a Call

Recording a Conference

Setting a Mark When Recording a

Call Stopping a Recording

Checking Storage Space

Recording a Call

You can record the important parts during an active call.

Important

: Before call recording, especially those involving PSTN, it is necessary to know about the rules and restrictions of

call recording in the country where you are.

It is also very important to inform all the call parties that you are recording and ask for their consent before recording the

con- versation.

Procedure

During a call, swipe the soft key area left and then select

Record

Select

More

Record

The phone screen displays a recording icon and recording duration.

Summary of Contents for 1120102





















































































































































































Search results

Summary of Contents for 1120102

Reviews:

Related manuals for 1120102

Brands by name

Popular brands

2N 1120102, User Manual

Search results

Summary of Contents for 1120102

Reviews:

Related manuals for 1120102

Brands by name

Popular brands