2N TELEKOMUNIKACE a.s., www.2n.cz
57/85
2.4 Extending Module Connection
2N IP Safety
®
allows to connect following extending modules:
Additional Switch
The
(Part No. 9151010) is used for extending the number of inputs
Additional Switch
/outputs. This extending module is intended for mounting into the
main
2N IP Safety
®
unit and is compatible with the basic units with Part No. 915210xxxxx. It is not possible
to connect this module to main unit Part No.
.
9152102W
Function:
The
Additional Switch adds two additional switches, one logical input
2N IPSafety
®
and a tamper switch to the
basic unit. The purpose of the tamper switch
2N IP Safety
®
is to signal any unauthorised opening of the intercom (to prevent a theft, e.g.). It is
recommended to use the tamper switch.
Tip
Summary of Contents for 01353-001
