2N Telekomunikace NetSpeaker, User Manual

Page: 31 / 39

Basic Functions 4.1
31
2N
®
NetSpeaker Status Signalling
2N
®
NetSpeaker is equipped with colour LEDs on its front panel, which indicate
operational statuses.
Refer to the table below for the list of available operational statuses:
Signalling Status
Green (permanent light)
Supply voltage application status -
2N
®
NetSpeaker is starting.
Green (quick flashing)
LAN connection in progress. If this LED is
shining continuously, check the LAN
connection.
Green, blue (quick flashing)
2N
®
NetSpeaker Server connection in
progress. If this LED is shining continuously,
check the connection.
Blue (permanent light)
2N
®
NetSpeaker is connected to
2N
®
NetSpeaker Server but fails to receive
the audio stream. Normal operational status
in which 2N
®
NetSpeaker is not in the active
audio session.
White (permanent light)
2N
®
NetSpeaker is connected to the
2N
®
NetSpeaker Server and is receiving audio
stream.
Blue (slow flashing)
2N
®
NetSpeaker is connected to the
2N
®
NetSpeaker Server but has not been
installed in the system. Use the
2N
®
NetSpeaker Console application for
installation.
Yellow (quick flashing)
Internal FLASH memory deletion in progress
during resetting.
Orange (quick flashing)
Device failure. Try to restart, disconnect from
power supply or reset he device. If nothing
helps, contact the 2N TELEKOMUNIKACE
Technical Support staff.