2N Telekomunikace NetSpeaker, User Manual

Page: 24 / 39

2N® NetSpeaker Configuration
3.1
24
3.1 2N
®
NetSpeaker Configuration
Default Setting
In some cases, it may be useful to reset the 2N
®
NetSpeaker factory values using the
RESET button on the back panel. Do this, for example, if 2N
®
NetSpeaker ceases to
respond, which may be caused by incorrect LAN settings, LAN configuration changes,
forgotten password and so on.
Resetting Procedure
1. Use a thin rigid tool (a toothpick or a paperclip) to press the RESET button on
the back panel.
2. Keep the RESET button pressed as long as the front panel LED is shining green
(approx. for 5s).
3. Release the button as soon as the LED starts flashing yellow quickly. It means
that the configuration in the internal FLASH memory is being deleted. This
operation takes about 50s. Do not disconnect the device from power supply
during this period.
Factory Settings
By default, the parameters have the following factory values:
Parameter Name Default Value
dhcpclient 0 (OFF)
ipaddr 192.168.1.100
ipmask 255.255.255.0
defaultgw 192.168.1.1
pwd admin
activemode 0 (Passive mode)
srvipaddr 192.168.1.2
srvport 6999
srvpwd admin