2N Telekomunikace LTE Verso, Installation Manual

Page: 149 / 213

Installation manual 2N® LTE Verso
149 / 213
Legend
MicroSIM MicroSIM card slot
MMCX antenna connector LTE mobile network antenna connector
IN1 IN1 terminals for input in passive/ active mode (−30 V to
+30 V DC)
OFF = open OR U
IN
> 1.5 V
ON = closed contact OR U
IN
< 1.5 V
OUT1
OUT1 terminals of active input for 2N
®
Security Relay or
electric lock connection 8 up to 12 V DC depending on
power supply (PoE: 10 V; adapter: power supply voltage
minus 2 V), max 400 mA
RELAY1 RELAY1 terminals with accessible 30 V / 1 A AC/DC NO/NC
contact. Used for connection of non-critical devices only
(lights, e.g.).
12V/2A External 12 V / 2 A DC supply terminals
GND Grounding terminal
RESET RESET / FACTORY RESET button
RGY LED indicators (red/green/yellow)
R LED indicator on the upper board (red). Flashing indicates
that the provider's network is being searched for. Once
the network is connected, the LED stops shining.
LINE OUT LINE OUT connector (1 V
RMS
). Connector type JST
SHR-02V-S.
MIC MIC connector for microphone connection
BUS
2N
®
IP/LTE Verso bus connector