Installation
To install, locate 2 HP of space in your Eurorack case and confirm the positive 12 volts
and negative 12 volts sides of the power distribution lines. Plug the connector into
the power distribution board of your case, keeping in mind that the red band corre-
sponds to negative 12 volts. In most systems, the negative 12 volt supply line is at
the bottom. The power cable should be connected to the module with the red band
facing the front of the module.
Specifications
• Size: 2 HP
• Depth 42mm
• Current Consumption:
–
+12V: 40mA
–
-12V: 7mA
4
Summary of Contents for Arp
Page 1: ...Arp 1 ...
Page 5: ...Diagram 5 ...
