2GIG-NVR1
NETWORK VIDEO RECORDER (NVR)
INSTALLATION INSTRUCTIONS
Contents
Verify that the package includes the following:
• 1—2GIG Network Video Recorder Module (NVR)
• 1—Plug-in Power Adapter (120VAC)
• 1—3”CD
• 1—Paper Moun ng Template Guide
• 1— USB Mouse Controller
• 1— 1 Terabyte Single Hard Disk Drive
• 4—1-1/2" Phillips Screws and anchors
• 4—1/4" Phillips Screws (for moun ng hard drive to NVR cover)
• 1—Removable Terminal Block (to connect alarm input/output)
Figure 1.
Network Video Recorder (NVR) Contents
Installa
Ɵ
on Tools Required
• Phillips Screw Driver
• Variable Speed Electric Drill
• Level (for wall moun ng of NVR module)
Hard Drive Installation into NVR
1.
Remove the two screws on the bo om of the Network Video Recorder
housing.
Figure 2.
Hard Disk Cover Removal
2.
Pry up the hard disk cover to expose wiring harness for harddisk connec on.
3.
Fix the hard disk to the hard disk cover using 4 1/4" Phillips screws (Provided
with NVR).
Figure 3.
Fixing Hard Disk to NVR Hard Disk Cover
Figure 4.
Placing Hard Disk/NVR cover into NVR case bo om.
4.
Plug wiring harness to the hard drive terminals, then seat hard drive with
cover down into NVR case.
Figure 5.
Plugging in Hard Drive
A
A
A
A
TOP
Use holes marked with
“A”
when installing (1.4 inc
h length) scre
ws.
HARD DRIVE COVER
HARD DRIVE
WIRING
HARNESS
PLUG
CONNECTOR
HARD DRIVE
