-3-
3. Unit Mounting
Din rail
Din rail
Mounting Buckle
Step1: Mount the din rail to
the wall with screws ;
Step2: Pull down the
mounting buckle,then hang
the unit on din rail.
1 2
3 4 5 6
ON
1 2
3
4 5 6
ON
1 2
3
4
5 6
ON
1 2
3 4
5
6
ON
Bit
DIP1~DIP2
set to the first DT-SCU.
When all DT-SCU of the system are configured to connect the two cameras(two
TYPE A Cameras or two TYPE B Cameras ), it should be set to ON;
DIP3
DIP4
DIP5
DIP6
Bit State
Description
1 2
3 4
5
6
ON
When the system connected SC6V, and SC6V connected two cameras(the
two cameras of the device is valid),it should be set to ON;
TYPE A Camera used. When DT-SCU connected TYPE A Camera, it should
be set to ON.
TYPE B Camera used. When DT-SCU connected TYPE B Camera, it should
be set to ON.
1 2
3 4 5 6
ON
1 2
3 4 5 6
ON
1 2
3 4 5 6
ON
set to the second DT-SCU.
set to the third DT-SCU.
set to the fourth DT-SCU.
When all DT-SCU of the system are configured to connect the four cameras(two
TYPE A Cameras and two TYPE B Cameras ), it should be set to OFF.
When the system don’t connected SC6V(or connected SC6V, but SC6V
don’t connected camera), it should be set to OFF.
DIP:DIP switches.
