Parts and Function
The door station is an audio door station without camera,which is designed for DT 2-wire system.
The front panel is made of zinc alloy for better protection against vandalism & cauterization, and
the call button is also made of zinc alloy with blue backlight for auxiliary illumination, the unlock
and talking LED indicator guarantee the door station working efficiently.
With the rainy cover, the door station can be strongly protection against water.
Terminal Description
Speaker
Talk Indicator
Unlock Indicator
Call Button
Front Panel
Microphone
1
2
3
4
7
5
6
1
2
3
4
5
6
Rainy Cover
7
M4*10
PM3*12
1
2
3
-
+
Bus PL S2+ S1+ S1-
AC~
PC6
1 2 3
ON
1 2 3
1 2 3
ON
1 2 3
BUS(Blue&Green)
S2+(Red)
PL(White)
S1+(Yellow)
S1-(Black)
4P
terminal
DIP
PROG
SPK adjust
Lock Control
Jumper
Connection line
CALL button
PL(White): external lock power input, connect to the power positive(power +).
S1+(Yellow): lock power(+) output.
S1-(Black): lock power(-) output.
Unit Mounting
Wiring and Connection
Basic one-to-one connecton
BUS(Blue&Green);
S2+(Red); PL(White); S1+(Yellow); S1-(Black);
The location of outdoor station should kept away from direct snow, rain and intense light.
Accessory contents:
Accessories include a screwdriver T20, one M4x10 screw, two PA4x25 screws, three PA3x25
screws, three PM3x12 screws and five screw stoppers 6x30.
Installation steps:
Installation height for door station usually is 145~160cm.
1. Use screws to fix the back panel and rain cover to the wall, connect the cable correctly.
2. Attach the front panel to the back panel, then use the screw to fix it.
Audio
Handset
-
2
-
Summary of Contents for CDV17D
Page 11: ......
