2easy 2-wire Series, Technical Manual

Page: 7 / 30

2 EASY
-
7
-
Remember to power Off and power On the door station
and then
flip
DIP
-6 ON to
perform
following settings
:
1. Press Key A, Unlock I ndicator turns on with double beep sound
2. Press Key A again to set the Unlocking Mode to Normally Open or Normally Closed
Normally Open : Status I ndicator blinks once with beep sound
Normally Closed : Status I ndicator blinks twice with beep sound
If door station has TFT screen connected, current Unlocking Mode will be visible on the screen
• Unlocking Mode Setting
2
.
Settings via I
nvisible K eys A and B
•
DI P-4 is f or button code selection f or Door Stations with buttons . All B uttons are pre - pro g rammed
with U ser C ode / Address ( see pa g e 15). I f you plannin g to use f actory pro g rammin g, k eep DI P-4
Off. When f actory pro g rammin g g oin g to be modi f ied , chan g e DI P-4 to O n position
•
DI P-5 is f or unloc k in g time q uic k settin g. Off(0) is the de f ault settin g, and the de f ault time is 1
second . I f set O n (1), the unloc k time is 5 seconds ( Di ff erent unloc k time can be pro g rammed ,
DIP-5 should be in On position for different times)
•
DI P-6 is f or acti v atin g in v isible k ey A and k ey B. Power Off door station and power On, then flip
DIP-6 into On position. Remember to flip Off after programming finished.
VD MODULE