2E OPS-600, User Manual

Page: 7 / 28

EN
6 7
UPS mode
UPS function
This product has the bypass mode, does not need to pass through the
battery, can directly output from the AC.
In UPS mode, when the AC input power of the mains is cut off due to a
power outage, the AC input power of the mains can be used in about
automatic switch to product battery power within 10 ms to ensure AC
output.
UPS Connections
As shown in the figure below, connect the product between the
socket on the wall and the electrical appliances, and the power of the
product is in the ON state. When you turn on the power of the electrical
appliances, it will directly uses the AC power of the power grid.
In this state, when the power grid is cut off, it will automatically switch
to the product’s internal battery to supply power.