2E GAMING SPARGO NEO, Operation Manual, Page: 16 / 23

16
EN
SYSTEM COMPONENTS INSTALLATION
Remove case panels.
1. Side (left) panel-window (tempered glass). Fastened with screws (4 pcs.). To disassemble the
panel, it is necessary to unscrew the screws and carefully remove the panel.
2. Side (right) panel (metal). It is fixed with screws (2 pcs.) from the back of the case. To
dismantle the panel, it is necessary to unscrew the screws and carefully remove the panel.
3. The front panel is fixed from the inside with plastic fasteners (clips). When pressed, they are
released from the holes. In order to dismantle the panel, it is necessary to pull its lower part,
holding the case. When the clips detach from the hole (click), the panel is removed.
Motherboard installation.
1. Determine the location of the motherboard.
2. Position so that the external connectors are accessible from the rear panel.
3. Motherboard installation.
4. Fix with MB screws.